Showing posts with label crafts. Show all posts
Showing posts with label crafts. Show all posts

Friday, November 3, 2017

DIY Crystal Succulent garden - beautiful tabletop centerpiece

I love all kind of plants both indoors and outdoors, especially Succulents. I have a lot of different Succulent species at home and from time to time I like to make different home decor arrangements or Succulent gardens as they are called. Last week I decide to combine two of my passions Crystals and Succulents and show it here. So here it is, my miniature Crystal Succulent garden :)

https://www.arctida.com/en/

If you wish to know how to make your own Succulent garden see my previous tutorial post with DIY instruction!

http://arctida.blogspot.se/2012/09/diy-succulent-gardens-how-to.html

Eventually these little cuties will grow, divide, produce babies and they will need to be re-potted into a bigger bowl so they can look like this :)

https://www.arctida.com/en/

   More of my DIY projects

Sunday, January 25, 2015

DIY Honey Lavender salve tutorial. How to make a healing ointment recipe

I love using natural products for all of my personal care so I thought I’ll share with you my favorite recipe of Honey salve with Lavender that I’ve been making for my family for years.

http://www.arctida.com/

Ingredients:
Olive Oil ~ 2 oz (57 ml)
Cocoa Butter ~ 0.5 oz (15 g/ 15 ml)
Beeswax ~ 0.7 oz (19 g/20 ml)
Honey, preferably raw honey ~ 1 tsp (5 ml)
Vitamin E ~ 1/2 tsp (3 ml)
Lavender essential oil (or your own choice) ~ 10-20 drops

http://www.arctida.com/

1.    Combine Olive oil, Cocoa butter and Beeswax into a mixing bowl and melt in a double boiler or in a microwave oven.

http://www.arctida.com/

2.    Allow salve to cool on the counter. When the mixture has cooled down to approximately 100 degrees Fahrenheit (40°C degree Celsius) you can start adding Honey and Vitamin E. The essential oils should be last. Blend the whole mixture well with rubber spatula, spoon or with the electric hand mixer.


3.    Transfer the finished salve into the smaller containers of your choice. Recipe yields approximately 100 ml (~ 3,5 oz) of product.

http://www.arctida.com/

http://www.arctida.com/

Notes:

•    Honey is a known source of the bacteria spores that cause botulism. The spores are not nearly enough to hurt an adult and have never been known to cause harm by applying to wounds. Still, to be safe, don’t use honey or honey salve on children under two years old unless the honey has been sterilized.

•    Heating raw honey past the maximum hive temperature of 95 degrees Fahrenheit changes honey’s essential composition and degrades its quality. It partially destroys honey’s beneficial enzymes and ‘boils off’ volatile compounds that account for the unique, delicate floral aroma of the honey. If you wish to preserve as much of the honey properties as possible, wait until the mixture has cooled off to 95 degrees Fahrenheit (35°C degree Celsius). Most commercial honey is already heated to 160-180 degrees Fahrenheit (70-80 °C degree Celsius) so if you are using commercial honey, you can add honey right after melting your oils/butters/beeswax together.


Wednesday, March 20, 2013

DIY tutorial Marimo moss ball mini aquarium with sea treasures

I have always liked to collect seashells and sea glass from every beach that I’ve been (and now my daughter brings home even more things from the beach than I ever did). So if you are like me and have a lot of sea treasures just laying around perhaps this DIY could be something for you :)

I’ve recently found the cutest little plants, algae actually, that looked so adorable I just couldn’t resist buying one. They called Marimo moss balls, although technically they are not moss but algae. Since I don’t have a real size aquarium at home and I’m not planning to get one, I decided to make a miniature aquarium that doesn’t require much care.

So here is a DIY instruction on how to make your own pretty mini aquarium or water terrarium containing Marimo moss ball and your own collected beach treasures.

Supplies – glass container/bowl/vase of your choice, sand or aquarium gravel, marimo ball, sea treasures of your choice: shells, beach glass, drift wood etc… 

http://www.arctida.com/
 Step 1: First, add a layer of sand or gravel to the bottom of your container http://www.arctida.com/
Step 2: Fill the container with water and start adding your beach treasures. Arrange them any way you'd like.http://www.arctida.com/
 Step 3: Add Marimo moss ball and enjoy your mini aquarium that requires very little care :)http://www.arctida.com/
 http://www.arctida.com/
http://www.arctida.com/
http://www.arctida.com/

How to care for your Marimo balls:

Marimo's are actually very easy to take care of, probably one of the easiest plants (algae) that live in water. You just have to change the water every one or two weeks, they require normal household lighting to make food (indirect sunlight is fine) and you should turn them over once in a while for them to keep their round shape (I do it every time I change water).

and psst, if you wish your Marimo ball to float just squeeze the water out of them :)

More of my DIY projects

Friday, December 21, 2012

DIY Christmas Ornament Tree - how to instructions tabletop centerpiece

The Christmas is almost here and we have all the decorations in place. This year me and my little princess decided to make an Ornament Christmas Tree. I’ve seen these kinds of trees surfing the Internet and thought it would be a perfect project to make together with my daughter :)

Supplies: A mix of round Christmas ball ornaments in at least 4 different sizes, knitting needle, ribbon spool, pieces of craft cotton or Styrofoam. 


2. Thread the knitting needle up through the bottom of the spool. If the spool has a large hole – you can stuff it with pieces of cotton or Styrofoam to make sure the needle stays straight.


3. String largest Christmas ball ornaments onto the needle, slipping the metal loops on the balls over the point of the needle. Continue with smaller sizes until you are satisfied with the end result.


3. I removed the metal ring from the top ornament and hid the tip of the needle by placing the ornament upside down over the tip.



I love absolutely love the finished tree, it is so festive and pretty and it was so easy to make! 

More of my DIY projects

Wednesday, November 28, 2012

DIY autumn home decor Falling Leaves tutorial - how to make a fall hanging

The fall has left us already and winter has not taken a real grip on south Sweden just yet. All leaves are gone and it is wet and cold outside. I miss fall colors, so me and my daughter decided to preserve some of the autumn leaves that we collected and make a pretty window hanging with them. We used maple leaves because they come in the whole range of autumnal colors, from golden yellow to burgundy red and me and my little princess really love the shape of these pretty leaves :)

So here is a fun DIY project with fall leaves to remember the Autumn.

Supplies: colorful leaves, candle wax or beeswax, double boiler, monofilament, clothespins


1. Slowly melt candle wax or beeswax over a double boiler; never allow wax to boil. Dip leaves in wax one at a time, holding by stem. Gently shake off excess wax. I used candle wax in this project.


2. Hang leaves on clothespins to dry. Some may be dipped again, depending on desired look; let dry between coatings. I used an old newspaper underneath the leaves to avoid wax stains on the floor.  


3. Hang finished leaves from lengths of monofilament.


I love how this project turned out. The leaves look like they've been frozen in time while falling down from the tree. And it gives us a chance to enjoy fall just a little bit longer! Next weekend it is time to start decorating before Christmas here in Sweden. I'm thinking of maybe making a Christmas decoration out of these leaves so stay tuned :)

More of my DIY projects

Wednesday, September 26, 2012

DIY Succulent gardens - how to instructions tabletop centerpiece

I love plants and I love succulents especially! Their shapes, colors and unusual looks always make me happy and amazed at the same time. I’ve already tried making succulent mini gardens before so when a couple of days ago I found amazing vintage bowls/vases at the local thrift shop I just had to do something about them :)

So here is a DIY instruction on how to make your own pretty succulent garden.

Supplies: bowl/vase/planter of your choice, succulents, cactus/succulent potting soil, decorative stones and pebbles, charcoal.


The pretty vintage bowls that I bought and some of the plants and cuttings that I've had at home...


Step 1: First, add a layer of pebbles to the bottom of your container. This will ensure that water drains to the bottom of the container and that the roots of your plants aren't sitting in water. If you have planters with drainage holes you can skip this step. Add a layer of charcoal (black sprinkles on the picture) above the pebbles to battle any possible smell issues.


Step 2: Fill the planter with potting soil up to an inch or two below the top of the planter. Plant succulents in planters. You can mix multiple types of succulents in each planter or use all the same. Arrange them any way you'd like.


Step 3: If there are spaces where the soil shows you can cover the exposed soil with flat rocks, pebbles, aquarium gravels, moss or other pretty greeneries.


... and here are my finished pretties :)


 

I loved how they turned out! So I made another one as a centerpiece for my mom (white oval bowl that used to be a nursery for my young succulents on second pic).


Some of the succulents and cacti that I've used in my arrengments: Sempervivum, Echeveria Lola, Echeveria Pulidonis, Haworthia Fasciata, Crassula Radicans, Crassula Ovata C. portulacea, Gollum Jade, Crassula perforata, Sansevieria cylindrica, Kalanchoe, Crassula rupestris, Adromischus cooperi Crassulaceae, etc...

I'm planning on making a Plant Terrarium next time, so stay tuned :)

More of my DIY projects
Related Posts Plugin for WordPress, Blogger...